JKB-601ST Blow molding machine |
S --- bottle layers T---waterishline |
适应原料 Material |
|
PE、PP、PVC、PA…. |
最大制品容积 Max container capacity |
L |
1----6 |
模头数 Number of die |
set |
1、2、3、4 |
生产能力(空循环)Output(dry Cycle) |
pc/hr |
300 |
机器外形尺寸(长×宽×高)
Machine Dimension(L×W×H) |
M |
3.2x2.0x2.6 |
机器重量 Total weigh |
ton |
5.5 |
开合模系统 Clamping Unit |
锁模力 Clamping force |
KN |
65 |
模板间距 Platen opening stroke |
mm |
188-538 |
模板尺寸 Platen size |
mm |
338x430 |
最大模具尺寸(宽×高) Max mould size(W×H) |
mm |
360x450 |
模具厚度 Mould thickness |
mm |
190-320 |
动力 Power |
最大驱动动率 Max drive |
KW |
24.95 |
最大总功率 Total power |
KW |
47.5 |
螺杆风机功率 Fan power for screw |
KW |
0.48 |
气源压力 Air pressure |
Mpa |
0.7 |
气源排量 Air consumption |
m³/min |
0.9 |
平均能耗 Average energy consumption |
KW |
16.5 |
挤出系统 Extruder unit |
螺杆直径 Screw diameter |
mm |
60 |
螺杆比径比 Screw L/D ratio |
L/D
|
24 |
塑化能力 Plasticising capacity |
Kg/hr |
60 |
螺杆加热段数 Number of heating zone |
zone |
3 |
螺杆加热功率 Extruder heating power |
KW |
12 |
挤出电机功率 Extruder driving power |
KW |
15 |
模头 Die |
模头加热段数 Number of heating zone |
zone |
3..5 |
模头加热功率 Power of die heating |
KW |
5.7 |
挤出口最大直径 Max die-pin diameter |
mm |
150 |
双模头中心距 Center distance of double die |
mm |
150 |
肆模头中心距 Center distance of tetra-die |
mm |
85 |
透明线挤出系统 Waterishline Extruder unit |
螺杆直径 Screw diameter |
mm |
25 |
挤出电机功率 Extruder driving power |
kw |
0.75 |
螺杆加热功率 Extruder heating power |
kw |
2.2 |
双层挤出系统Double layers Extruder unit |
螺杆直径 Screw diameter |
mm |
30 |
挤出电机功率 Extruder driving power |
kw |
3.7 |
螺杆加热功率 Extruder heating power |
kw |
3.2 |